Set (8) High Impedance 80lb EV1 Fuel Injectors for Ford GM V8 LT1 LS1 LS6 835cc. Have been 100% tested and exactly match the internal coil resistance and fuel flow rate of OEM fuel injectors.
The individual flow characteristics and fuel atomization of above fuel injectors are almost same to or superior to the OEM and will help accelerate response time , save gasoline and improve MPG. Gain: 0.12ms/MG Offset: 0.055ms Turn on time 1.14ms at 14VDC Turn off time: 0.85ms at 600KPa. Voltage: 8-15 Volts, nominal 13.5 Volts. Pressure: Min 30PSIG/ Max 100PSIG. Overall Length: 2 7/8 inches, 74 mm.
O-ring to O-ring Length: 2 1/2 inches, 63 mm. Orings: Top and bottom, 14.5 mm. All of the following models. The following models must change injector plugs.
The following models require spacers and longer fuel rail bolts and must change injector plugs. THESE HIGH PERFORMANCE INJECTORS WILL REQUIRE ECU TUNING. INJECTOR CLIPS MAY BE REQUIRED FOR SOME MODEL s. The item "Set (8) High Impedance 80lb EV1 Fuel Injectors for Ford GM V8 LT1 LS1 LS6 835cc" is in sale since Wednesday, September 7, 2016. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Injectors".The seller is "autopartszone2008" and is located in Rowland Heights, California. This item can be shipped worldwide.