Do this installation on a soft, clean, or protected surface as to not scratch the face or your new bezel. Note while installing AC vents to new bezel, apply firm pressure while melting down the tabs so the AC vents will be flush. Step 6: Screw the supplied brackets onto the side of your aftermarket double din radio (using the supplied screw that came with the aftermarket radio).
Step 7: Wire the aftermarket radio harness to the harness supplied using butt connectors or solder wiring together. Step 8: Plug in aftermarket radio harness to aftermarket radio & install harness to factory radio plug. Step 9: Connect antenna adapter to factory antenna end & aftermarket radio. Step 10: Using the same 4 screws you used to take out the factory radio, screw in your new double din radio. Step 11: Snap New dash bezel back into dash. Make sure radio looks even from side to side and top to bottom, should be a nice even fit all the way around. You may need to readjust the brackets slightly to make radio completely centered.ENJOY YOUR NEWLY MOUNT RADIO AND BEZEL. The item "Jeep Grand Cherokee 2005-2007 Double Din Navigation Radio Bezel Dash Install Kit" is in sale since Wednesday, October 25, 2017. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Interior\Dash Parts".
The seller is "autoware302" and is located in Land O' Lakes, Florida. This item can be shipped worldwide.