Fits Jeep Grand Cherokee WJ Viper Coil mod rail delete

Do you have a 1999+ Jeep WJ with that coil rail on your plugs? You probably do, and I'm sure you've run into an issue, or will run into the issue of it failing on you at the most inopportune time, or the boots tore on you while trying to change the spark plugs, or maybe it cracked? Well, these things can get costly, and they're a pain to diagnose as an issue as well.

Well, say goodbye to that coil rail and upgrade yourself to the Dodge Viper coil pack for your Jeep 4.0! Our bracket installs on the top 2 motor mount bracket bolts that go to the block (shown in photos), this allows the Viper coil to install directly onto it, and the only thing you're going to need, is a 11mm, 15mm, and 13mm socket!

For 1999 model years, you would normally have to change the pinout of your coil rail plug in order to run an aftermarket rail, or in this case, the new coil pack, but not to fear, no wiring is needed, our harness is a plug n play design that will work right off the bat! Just make sure to message us that you have a'99 model year, or put a note in at checkout. In photo's section is a diagram on firing order for new coil, FOLLOW OUR DIAGRAM, NOT THE NUMBERS ON THE COIL PACK! The bracket comes powder coated and is made of strong 12 gauge steel, cut to the perfect size and is easily mountable.

Bracket is a flat plate as shown in photo #2, not the bent bracket you see in photo 1, we have updated the design. PLEASE NOTE: PROFESSIONAL INSTALLATION RECOMMENDED.

---