Jeep Grand Cherokee

A618 A518 46RE 47RE Performance Transmission Rebuild Kit Level 2 + Billet Lever

A618 A518 46RE 47RE Performance Transmission Rebuild Kit Level 2 + Billet Lever
A618 A518 46RE 47RE Performance Transmission Rebuild Kit Level 2 + Billet Lever
A618 A518 46RE 47RE Performance Transmission Rebuild Kit Level 2 + Billet Lever
A618 A518 46RE 47RE Performance Transmission Rebuild Kit Level 2 + Billet Lever

A618 A518 46RE 47RE Performance Transmission Rebuild Kit Level 2 + Billet Lever
This Rebuild kit includes all of the High Performance Red Alto Friction Plates, Kolene Steel Plates, Sealing Rings, Metal Clad Seals, Gaskets, Orings, rubber Piston Seals, High performance Kevlar Band, dacron filter or all plastic type filter, pump bushing and ext. TCS 4.2 Band Ratio Lever. The 4.2 ratio band lever provides greater mechanical clamping force than the O. 3.8 ratio lever ie: Placing 1 pound of force on the tip of the apply lever produces 4.2 pounds of force on the band.

CNC machined from 4140 HTSR for added strength. (includes; Roller Clutch output bearing, overdrive clutch piston hub bearing, and backing plate planet bearing) The Bearing kit is a critical part of a thorough rebuild because they are movable parts that take a lot of wear and abuse. All bearings have a reasonable service life of 100,000 to 200,000 miles. Always replace high mileage bearings. Front band Apply Servo (includes the heavy duty band strut).

Super Servo provides the following improvements: 11% more holding power, firmer 1-2 shift, more positive 2-3 shift and is perfect for Heavy-Duty and Performance Applications! Low & Reverse Super Servo. Super Servo will provide a newly designed piston that will not flip or break in the bore. This piston is constructed of 6061-T6 billet aluminum!

An upgraded steel servo pin is also. NOTE: Low/Reverse Super Servo is different from Gas to Diesel if you have a Gas vehicle please leave us a message and we will gladly swap out the Diesel Servo that comes in this kit for the Gas one. OE plastic accumulators in listed Chrysler units are prone to breaking and have poor sealing qualities, and metal rings offered with aftermarket accumulators also have sealing issues.

The improved design and material of Sonnax accumulator piston kit 22841-04K eliminates cross-leaks between circuits. Overdrive direct front waved Snap Ring. This waved overdrive snap ring is a common failure in these Dodges and should be replaced on every Dodge rebuild. Please Note: We will need to know the exact year of your unit as there are two different types of filter based on the year. 94-97 require the dacron filter 98-ON require an all plastic type you see pictured!

These plates are Red Eagle high performance clutch plates. These clutches are put through a process where the friction paper is saturated in a phenolic resin, cured, and then saturated a second time in a silicate.

The silicate imparts high heat resistance. So why not use what the professionals use! All these Kits have Sealing rings made by Clutches Manufactured by Alto (Red Eagle) and Gasket Sets made by the Co.

Don't get caught with a kit of lesser Quality! This is an actual picture of the item for sale. This is NOT a generic picture. We have hundreds of bearing kits and all kinds of hard parts available.

With any questions you may have. The item "A618 A518 46RE 47RE Performance Transmission Rebuild Kit Level 2 + Billet Lever" is in sale since Tuesday, October 27, 2015. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Transmission & Drivetrain\Manual Transmissions & Parts\Manual Transmission Parts". The seller is "acerl" and is located in Redding, California. This item can be shipped worldwide.

  • Brand: Alto
  • Manufacturer Part Number: 028907EHP_Deluxe_L2


A618 A518 46RE 47RE Performance Transmission Rebuild Kit Level 2 + Billet Lever