2011-2015 Jeep Grand Cherokee WK2 Front Upper Control Arm For 2-4 Lift Kit
Brand New Front Upper Control Arm For 2-4 Lift Kit. Looking to correct your alignment/geometry on your lift application, look no future. This Upper Control Arm is design to correct the travel distance for your vehicle after been lifted. The upper control arms (UCA's) are stronger than the stock arms and are 100% bolt-on. 4130 chromoly tubular upper control arms arepowder coated made to last with ball joint included. The UCA's are a direct fit and will work on trucks that are have leveling kits, or lift kits. It is a must have to add strength and performance to your truck while on or off road. The UCA is allow for smooth and retain wheel travel without worrying about factory ball joint bind. Heavy Duty Upper Control Arms x2. Installation time is approximately 1-2 hours. Determine your lift kit requirements based off current stock heights (displayed in green) for both front and rear by measuring from the ground to the bottom of your vehicle's flare. Level to your stock rear measurements by adding appropriate lift to the front of your vehicle. Add to both front and rear equally to gain lift while retaining the stock appearance. Achieve a leveled lift by adding to both front and rear while accounting for the stock difference. Free Return if for any reason you are not satisfy with the item. Vehicle fitment is in accordance with American models; international models may differ and affect proper fitment requirements. Requests for fitment checks made in order notes will not be satisfied.