2005-2007 Jeep Grand Cherokee Immobilizer 56053016AO VIN Programmed Plug & Play

This is a used and now discontinued immobilizer module, also known as a Sentry Key Remote Entry Module (SKREEM), or Wireless Control Module (WCM). It will be programmed to your VIN with two new uncut remote head keys making it plug and play without any further programing needed. And that's if you could even find one that knows how to do it. Simply have the keys cut to match your ignition lock, install the new module, and you're done. Not sure if this fits your vehicle? Send us your VIN and we can look it up. Models which have a tire pressure monitoring system (TPMS) will automatically relearn the tire pressure sensor IDs after about 20 minutes of driving above 20 MPH. This module also comes unlocked with the secret PIN code to allow programming of extra keys and to allow VIN and PIN transfer from immobilizer to ECU via scan tool in the event of ECU replacement. Please verify your part number before ordering.

We provide a free return label for the core. We can not begin to process your order until we get your VIN number.

Please note that the VIN that you send us MUST match the VIN programmed into your engine computer for this module to be plug & play. If it does not, your mechanic will need to run a "PCM Replaced" routine. This will update the VIN in your engine computer to match VIN your vehicle's titled VIN.

Please be certain this is the part you need before ordering. Please check the vehicle compatibility section, and if you have any questions or concerns, feel free to contact me. A return for this item may be started for any reason within 30 Days from the date tracking shows it was delivered. Orders received before 10:00 a. If the item is found to be defective, I will at my discretion do one of the following.

1 Repair the part if possible and send it back to you. 2 Replace the part with an equivalent part if one is available.

---