Capable of boosting horse power up To 350+ BHP, standard 4 bolt exhaust flange, Capable of 8 PSI or 15-25 PSI output at peak power. Internal wastegate setting: 8 PSI. High quality t04e with a forged turbine propeller wheel! Standard 5 bolt T3 Downpipe Flange.5 Bolt Standard Hot Side. Oil Inlet - 1/8 NPT Oil Inlet. Bearing Type - Journal Bearing. 8 Blade Type T4 Compressor Wheel. T3 Type 4 Bolt Turbine flange. 2.48" Minor and 2.89" Major Propellar.
6061 Light Weight Billet Aluminum Construction. Tube & Fin Light Weight Design. Construction: Machine Cut and Stamped Hand Welded.
Hot Air Temperature: 32°F302°F (0°C150°C). Overall Size - 27" x 7" x 2.5. Core Size - 21" x 6.5" x 2.5.In/Outlet - 2.5" OD / 2.25" ID. Made of High quality T-6061 LIGHTWEIGHT Aluminum Piping. Increase 65% Air Flow comparing with other Standard Piping. Material:Made of high quality silicone material. Thickness of wall:5 mm, 4 ply reinforced. Working Pressure: 0.3 Mpa (43.5 PSI) to 0.9 Mpa (130.5 PSI). Working Temperature: -76°F (-60°C) to +500°F (+260°C). Size tolerance:+/-0.5 mm. Made of High quality 301 ss Stainless Steel Clamp. Stainless steel construction resists corrosion.
Provide uniform sealing pressure for a positive. Polished finish increases engine bay aesthetics.Oil-free filter Micro cotton gauze type filter material washable with water or soap and reusable. Improves Up to 95% Filtration Efficiency. Designed to increase horsepower and acceleration.
Width: 6" Inlet: 3.0" Overall Tall: 3.5" Mesh Tall: 2.5". Aggressive JDM racing discharge sound. 8 Discharge ports that draw in surrounding air and release a unique discharge sound. 40mm hard-anodized valve for increased airflow. Dual spring system promoted response and allows for high boost pressures.
Support up to 30 PSI boost pressure. CNC Machined Turbo Adapter Plate. Weldable 10AN Oil Pan Fitting Included. 1/8 NPT Fittings Natural Polish Finish. Brass Fitting Block Fitting and Port Cover Included.
Allows to adjust PSI ratings without changing the wastegate springs as well as replacing the wastegate springs. High Performance Manual Boost Control From 030 psi Capacity. CNC Machined Light Weight and Resistant to Rust.
Hose clamp and all necessary hardware for complete installation. High strength Alloy aluminum body with steel head. Comes with 8 psi spring installed. Protect the turbo system from over boosting.
High Quality Cast Raw Steel. 4 bolt for T3 Turbo. Single Entry T3 Turbo Flange.Bolt Diameter: M10 Thru Holes. Holes, Holes Are Drilled Through, Not Threaded. Fits all T3 and T3/T4 hybrid turbos with 4 bolt standard size inlet.
Fits all T3 and T3/T4 hybrid turbos with 5 bolt standard size outlet. For emissions related items please check with your local jurisdiction for emission specific requirements before purchasing. No installation instruction included unless otherwise specified. Color may randomly selected depend on hand or inventory.Modification might required for complete installation. Professional TURBO INSTALLER is Highly recommend. This is not a complete kit yet!! You will have to fit up and weld it up, This Kit Will add 50-70+hp at 7 psi. You will need Turbo Manifold, Turbo Downpipe to complete the Turbo Kit Project. Surcharges will be added to VI, PR, HI, AK, MP, AS. Ships from USA (west coast). We Strive To Respond In A Timely Fashion! E-mails are responded to within 24 hours Monday-Friday, with the exception of US Holidays.
We Would Very Much Appreciate A Chance To Make Things Right! The item "Universal Performance Turbo Charger Kit T3/T4+Intercooler+Bov+Wastegate Black" is in sale since Monday, December 21, 2020. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Turbos, Nitrous, Superchargers\Turbo Chargers & Parts". The seller is "heavyweightchampion" and is located in Hacienda Heights, California.
This item can be shipped worldwide.