Jeep Grand Cherokee

T04E T3/T4 V-BAND Turbocharger Turbo AR. 50/63 with Internal Wastegate Bearing

T04E T3/T4 V-BAND Turbocharger Turbo AR. 50/63 with Internal Wastegate Bearing
T04E T3/T4 V-BAND Turbocharger Turbo AR. 50/63 with Internal Wastegate Bearing
T04E T3/T4 V-BAND Turbocharger Turbo AR. 50/63 with Internal Wastegate Bearing

T04E T3/T4 V-BAND Turbocharger Turbo AR. 50/63 with Internal Wastegate Bearing
T04E T3/T4 V-BAND Turbocharger Turbo AR. 50/63 with Internal Wastegate Bearing. T3/T4 T04E V-BAND Universal Turbocharger. T3/T4 hybrid turbocharger assembly is created by installing a T4 compressor wheel and housing onto a T3 turbine housing wheel and center section.

A T3/T4 hybrid turbocharger assembly is a compromise for engines where a T3 turbocharger is too small to reach the desired maximum horsepower but using a T4 turbocharger would create an unacceptable amount of turbo lag. The T3/T4 turbocharger is designed to be used on engines displacing 1.5L-3.0L and is typically good for around 400HP. They are also commonly used in twin turbo applications. In this case those figures would be doubled 3.2L-5.0L engines up to 800HP.

Horsepower ratings are generally meant to express the turbochargers maximum airflow capability. Recommended boost pressures are 7psi(0.5 Bar) to 21psi(1.5 Bar) and boost pressures should not exceed 30psi(2 Bar). Exceeding 21psi(1.5 Bar) of boost pressure can significantly reduce a turbochargers lifespan. Generally speaking 14psi(1 Bar) is good for a 100% increase in horsepower from a naturally aspirated engine. Also factory non-turbo engines without forged internal components on high octane pump gas (91-92 octane) it is not recommended exceeding 7psi. Doing so could result in damaging your engine. 100% Brand New Never Used or installed.

High quality material, cast housing with durable steel. Exhaust (Turbo Manifold) Flange: T3 T4 4 bolt Flange Patterns. Exhaust (Downpipe) Flange: V-Band Flange (3 Connection). Wastegate: 7 PSI Internal Wastegate. Horse Power: Boost Horse Power up to 420HP.

Inducer Diameter:50.5 mm. Inducer Diameter:65.5 mm. Exducer Diameter:55.9 mm. Perfect for 4 or 6 CYL, 1.5L-3.0L Engines or twin Turbo set up for V6, V8 engine. This is universal application turbo, Fits any T3 Turbo Manifold(Header) only. Modification might be required for some vehicles. Installation instruction is not included. Professional installer is highly recommended! Surcharges will be added to VI, PR, HI, AK, MP, AS. Ships from USA (west coast). We Strive To Respond In A Timely Fashion!

E-mails are responded to within 24 hours Monday-Friday, with the exception of US Holidays. We Would Very Much Appreciate A Chance To Make Things Right! The item "T04E T3/T4 V-BAND Turbocharger Turbo AR. 50/63 with Internal Wastegate Bearing" is in sale since Friday, May 1, 2020.

This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Turbos, Nitrous, Superchargers\Turbo Chargers & Parts". The seller is "heavyweightchampion" and is located in Hacienda Heights, California. This item can be shipped worldwide.

  • Brand: HEAVYWEIGHTCHAMPION
  • Manufacturer Part Number: T3/T4, T04e V-BAND TURBOCHARGER
  • Interchange Part Number: T3 4 Bolt Flang / V-Band Exhaust
  • Other Part Number: A/R: 0.50 / 0.63
  • Surface Finish: Cast / Steel
  • UPC: n/a
  • Placement on Vehicle: Left
  • Manufacturer: HWC-TBC-EB-041 T3,T4 T04E V-band External Wastegate


T04E T3/T4 V-BAND Turbocharger Turbo AR. 50/63 with Internal Wastegate Bearing