New 80 LB High Impedance Fuel Injectors EV1 Set (8) For Ford GM V8 LT1 LS1 LS6 835CC 110324 FI114992. This listing is for One Set of 8 80 lb.This makes these injectors very well suited to turbocharged and supercharged applications that see high fuel system pressures. These injectors flow 80 lbs/hr at 43.5 PSI (3 BAR) and up to 100 lbs/hr at 80 PSI. Despite the high flow rate these units are high-impedance, plus they are linear and controllable at low pulse widths and have been used in ULEV applications!
This allows you to use a larger injector than normally possible without hurting idle and low speed drive-ability. Adding to the flexibility of application, these units are high-impedance; making them compatible with most ECUs, while delivering the most flow available in a High-Impedance injector. 12 OHMS Saturated injectors will fit all of the following models. The following models must change injector plugs.
The following models require spacers and longer fuel rail bolts and must change injector plugs. These high performance injectors will require ECU tuning. Injector clips may be required for some models. Verify flow rate is correct for your car application.This is a single-hole disc-type fuel injector. Includes a set of 8 80lb/835cc fuel injectors. Standard long length 60mm 0-ring to o-ring. Low impedance performance characteristics with high impedance compatibility. Use for Ford, Chrysler, GM, BMW, VW, Audi, Mitsubishi, etc.
Quantity: One set of 8 fuel injectors. Car make: For Chrysler, GM, BMW, VW, Audi, Mitsubishi, etc. Design: GEN III EV1 style fuel injector.
Injector design: Metal & composite plastic. Filter design: Basket filter design at inlet. Spray pattern: 15 degree spray cone. Dynamic flow rate : 18.6 mg/pulse 2.5ms PW, 20 ms Period.
Coil resistance: 12 Ohms (This high-impedance injector will work with all factory ECM/PCM injector drivers). Static flow rate: 80 lb/hr = 835 cc/min at 43.5PSI (300kPa).Turn on time 1.14ms at 14VDC. Turn off time: 0.85ms at 600KPa. Voltage: 8-15 Volts, nominal 13.5 Volts. Pressure: Min 30PSIG/ Max 100PSIG. Overall length: 2 7/8 inches, 74 mm. O-ring to O-ring length: 2 1/2 inches, 63 mm. O-rings: Top and bottom 14.5 mm.
As a leading and emerging company in manufactory and exporting business, we are specialized in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for more than 10 years. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. If you have any changes, pls inform us. These charges are the buyers responsibility.
If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. You want to cancel an order.
If you need further assembly instructions for a product. Any other unspecified questions or concerns. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it's your fault.A: The item ships from Rancho Cucamonga, CA, United States. A: Please log on your account. Q: How do I return an item?
Please contact our customer service before you return an item. The item "Set of 8 High Impedance 80lb 835cc EV1 Fuel Injectors for Ford GM V8 LT1 LS1 LS6" is in sale since Monday, May 8, 2017. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Injectors". The seller is "greatfunctionitem" and is located in Ontario, California. This item can be shipped to United States, all countries in Europe, Canada, Australia.