GT45 TURBOCHARGER 4 INTERCOOLER PIPING UNIVERSAL TURBO KIT. HYPESPEED has the best products with the best prices.We believe in Safety and Standards in both machining and manufacturing. Unlike our competitors who offer you low prices for inferior products, we build products that lift and level your vehicle without compromise. Condition:100% Brand new and high quality. Includes (1) FRONT MOUNT INTERCOOLER.
Includes (8) 4 TUBING PIPE KIT. Includes (1) TURBO AIR FILTER. Includes (1) BLOW OFF VALVE.
Includes (1) OIL CATCH RESERVOIR TANK. Includes (1) TURBO HEAT SHIELD.
Includes (1) OIL DRAIN LINE. Includes (1) OIL FEED LINE. Turbocharger assembly is designed to be used on engines displacing 3.5L-8.0L and is typically good for around 800HP. Horsepower ratings are generally meant to express the turbochargers maximum airflow capability. Recommended boost pressures are 7psi.
5 Bar to 21psi(1.5 Bar) and boost pressures should not exceed 30psi(2 Bar). Exceeding 21psi(1.5 Bar) of boost pressure can significantly reduce a turbochargers lifespan. Generally speaking 14psi(1 Bar) is good for a 100% increase in horsepower from a naturally aspirated engine. Also factory non-turbo engines without forged internal components on high octane pump gas (91-92 octane) it is not recommended exceeding 7psi.Doing so could result in damaging your engine. High quality material, cast housing with durable steel. T4 4 bolt exhaust flange. V band downpipe flange pattern 3.50. Intake inlet & outlet: 3.75" & 2.25". Made by 6061 Billet Aluminum Construction. Core Size: 23.5" (L) x 11.75" (H) x 4 (W). Overall Size: 31" (L) x 12" (H) x 4 (W). Inlet / Outlet: 4 (Inch) OD.
Full Aluminium Pipe Thickness: 2.3mm (Durable). Tubing Size: 4 / 102mm OD. Includes (2) Straight Pipe 4 (102mm) OD.Includes (2) 90 Degree Mandrel Bent Pipe 4 (102mm) OD. Includes (2) 75 Degree Mandrel Bent Pipe 4 (102mm) OD. Includes (2) Mandrel U-Bent Pipe 4 (102mm) OD. Made of high quality silicone material.
Thickness of wall:5 mm, 4 ply reinforced. Working Pressure: 0.3 Mpa (43.5 PSI) to 0.9 Mpa (130.5 PSI). Working Temperature: -76°F (-60°C) to +500°F (+260°C). Size tolerance:+/-0.5 mm. Includes (6) Straight Silicon Hose 4 (102mm) ID.
Includes (2) 90 Degree Elbow Silicone Hose 4 (102mm) ID. Made of High quality 301 ss Stainless Steel Clamp. Stainless steel construction resists corrosion. Provide uniform sealing pressure for a positive. Polished finish increases engine bay aesthetics.Includes (16) Stainless Bolt T-clamps. Oil-free filter Micro cotton gauze type filter material washable with water or soap and reusable. Improves Up to 95% Filtration Efficiency.
Designed to increase horsepower and acceleration. Inlet: 4.0", Tall 6", Width: 6. Aggressive JDM racing discharge sound. 8 Discharge ports that draw in surrounding air and release a unique discharge sound. 40mm hard-anodized valve for increased airflow.
Dual spring system promoted response and allows for high boost pressures. Support up to 35 PSI boost pressure. Allows to adjust PSI ratings without changing the wastegate springs as well as replacing the wastegate springs.
High Performance Manual Boost Control From 030 psi Capacity. CNC Machined Light Weight and Resistant to Rust.
Hose clamp and all necessary hardware for complete installation. High strength Alloy aluminum body with steel head. Comes with 8 psi spring installed.
Protect the turbo system from over boosting. TIG Welded T-6061 Light-Weight Aluminum Construction. Light-Weight Filter Tank Design for Racing Applications.
Clear Tube Indicator for Easy Visual of Checking if the Tank is Full. Ensure Better Mileage, Better Performance and Preserve Engine Life.
Catch Oil and Sludge to Save the Life of the Engine. Universally Fits on Any T4 GT40 GT45 GT47 Small to Medium Sized Turbo Charger. It is our best product. Heavy duty turbo blanket wrapped around. Helps decrease turbo heat from spreading into the engine bay.OIL DRAIN FEED LINE KIT. CNC Machined Turbo Adapter Plate. Weldable 10AN Oil Pan Fitting Included. 1/8 NPT Fittings Natural Polish Finish. 1CNC Machined Turbo Adapter Plate. Brass Fitting Block Fitting and Port Cover Included. Suitable turbocharger downpipe and manifold will be needed to complete this kit.
For emissions related items please check with your local jurisdiction for emission specific requirements before purchasing. No installation instruction included unless otherwise specified. Color may randomly selected depend on hand or inventory. Modification might required for complete installation.
Professional TURBO INSTALLER is Highly recommend. We Strive To Respond In A Timely Fashion! We Would Very Much Appreciate A Chance To Make Things Right! The item "GT45 TURBO KIT 4 TUBING UNIVERSAL TURBOCHARGER BOV WASTEGATE GAUGE SHIELD BLACK" is in sale since Friday, February 22, 2019.
This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Turbos, Nitrous, Superchargers\Turbo Chargers & Parts". The seller is "hypespeed" and is located in Hacienda Heights, California. This item can be shipped worldwide.